Colors
Static Dissipative Colors
Starting at: $466.34 Carton
Zerostat High Performance ESD vinyl floor tile delivers permanent conductive/ dissipative properties through a specially developed binder system for consistent performance year in and year out. This extremely hard working, stain resistant, fully flexible vinyl provides years of (wax free), low maintenance service. Zerostat High Performance ESD floor tile offers the most thorough and consistent charge decay ratings available, a static load limit exceeding 1500 pounds per square inch, and the most aggressive pricing in the industry.
Simply stated Zerostat is the choice for controlling Electrostatics in printed circuit production, computer control rooms, process control, survey rooms, switchboard assembly, lithography and printing industry, health care/ special areas, testing of electronic devices, raised floors, heavy duty industrial warehouse areas, micromechanics, electronic manufacturing, and almost all clean room environments or anywhere sensitive electronics are utilized.
Offered in 26 colors Zerostat ESD High Performance floor tile creates expressive design opportunities to make your workplace functional, comfortable, and attractive. Available in conductive (series NS 2500) or dissipative (series LS 1500) both may be used with either permanent or releasable adhesive systems.
ASTM 150/EOS/ESD S7.1
PTP: 2.5×104 to 106
RTG: 2.5×104 to 106
STATIC DECAY:
Conditioning: 50% RH +/-2%@23° C+/-1° for 24 hours
Test conducted @: 50% RH +/-2%@23° C+/-1° C
Results=Time, second to decay to 10% of initial charge
Results, <0.01 seconds/p>
ASTM 150/EOS/ESD S7.1
PTP: 2.5×106 to 108
RTG: 2.5×106 to 108
Conditioning: 50% RH +/-2%@23° C+/-1° for 24 hours
Test conducted @: 50% RH +/-2%@23° C+/-1° C
Results=Time, second to decay to 10% of initial charge
Results, <0.02 seconds
Federal Specifications
Meets or exceeds performance characteristics of SS-T-312B
Electrical Resistance:
EOS/ESD S7.1, EOS/ESD 4.1 (RTG@100,10V)
NS 2500 – NFPA-99 (PTP) @ 100 V 2.5 x 104 to 106 LS
1500 – NFPA-99 (PTP) @ 100 V 106 to 108
Static Decay:
NFPA 56-A FTMS 4046 (101C) 5,000 to 50 volts
NS 2500 <0.01 seconds
LS 1500 <0.02 seconds
Conditioning:
50% RH +/- 2% @ 23° C +/- 1° C for 24 Hours
Test conducted @ 50% RH +/- 2% @ 23° C +/- 1° C
Test results = Time, seconds to decay to 10% of initial charge
Static Propensity:
AATCC-134
NS 2500
Neolite step test, <50 Volts, + polarity
Neolite scuff test <75 Volts, + polarity
LS 1500
Neolite step test <100 Volts, + polarity
Neolite scuff test <150 Volts, + polarity
Test chamber @ 700, RH @ 20%
Underlayment, earth grounded metal plate
Soles Neolite XS 664
With static dissipative polyurethane heel grounders:
Step <10V, Scuff <20V
Static Load Limit:
ASTM F-970
Exceeds 1500 Pounds per square inch.
Slip Resistance:
Meets or exceeds Federal standards and A.D.A. recommendations of .6 for flat surfaces.
Flexibility:
Meets or exceeds Federal Specification SS-T-312B, Type III, Vinyl Tile
Fire Resistance:
Passes ASTM E-662/NFPA 258 (smoke density) 450 or less.
Passes ASTM E-648/NFPA 253 (critical readiant flux) class 1
Zerostat shall be of homogeneous construction, sliced from a pressed vinyl block to assure a highly flexible tile of dense construction, dimensionally stable, extremely hard-wearing, with a completely non-directional pattern.
(dimensions are approximate)
Tile size . . . . . . . . . . 24″ x 24″ (61 cm x 61 cm)
Gauge . . . . . . . . . . . 0.080″ (2.0 mm)
Carton contents . . . 14 tiles (56.07 square feet; 5 square meters)
Also available in pre-grooved and 2 ft. x 4 ft (61 cm x 122 cm) tiles upon request.
Completed installation System should be tested “Surface to Ground” according to ASTM F-150 or EOS/ESD S7.1.