ElectraStat ESD Rubber Flooring

$12.86 Sq. Ft.

Avoid electrostatic discharge and its unforeseeable consequences.

Electrostat ESD Rubber Floorings offer protection for electronic components and devices, and protection against explosions triggered by electrostatic discharges.

Features and Benefits

  • The only light colored, electrically conductive rubber flooring.
  • Static generation less than 10 volts according to ESD STM 97.2 (tested with conductive shoes)
  • Easy to maintain, never needs conductive wax.
  • Resistant to chemicals and hot solder.
  • Reduces explosion risk.
  • Pin-dot alignment may vary from tile to tile.
  • Slip resistance in compliance with ADA guidelines.

Ideal For:

  • Production and testing areas for electric components (cleanrooms and different classes)
  • Assembly, testing and repair areas for electronic equipment
  • Rooms where electronic equipment is used
  • High-voltage and low-voltage systems and swtichboards
  • Computer Rooms
  • Open office facilities
SKU: N/A Categories: ,


In industrial enterprises and business establishments, floor coverings have to meet a very wide variety of requirements. ElectraStat Rubber Flooring enables you to create a safe and efficient manufacturing environment.

Friction and separation of two materials can cause electrostatic charges of up to 35,000 Volts. But even a charge of 30 Volts can damage or destroy electronic components if there is a sudden discharge.

This means:

  • The production of electronic components may be seriously impaired.
  • Electronic devices may cause high costs and operational stoppages, due to malfunctions and repairs.
  • In the chemical and pyrotechnical industries, there may even be explosions.
  • Electronically controlled production sequences can be disturbed or interrupted by electrostatic discharges.


ConstructionTwo-layer, vulcanized conductive rubber with high quality natural and industrial rubber components
Thickness1 mm
Total WeightN/A
Size24″ x 24″ tile and 4′ x 40′ rolls
Static Generation Comparision Less than 10 Volts per ESD STM 97.2<20 volts when tested accoding to ESD STM 97.2
Abrasion ResistanceTaber abrasion test, ASTM D 3389, H-18 wheel, 500 gram load, 1000 cycles, gram weight loss not greater than 0.70
System Resistance<1.0 x 106