When installing ESD conductive rolls of carpet or vinyl with fully integral conductive backings, a lower cost alternate installation system may be used: Use lower cost Ultra® Original a non-conductive full surface dry adhesive and bridge the seams between individual full surface conductive backed rolls or pieces of ESD carpet or vinyl rolls. (example ESD Unifloor Static Dissipative U78.
Ultra Circuit is applied on top of the Ultra® Original 1 ‘ from walls on the entire perimeter of the installation every 30 ft. approx. across the seams, and grounded with Static Logic Copper Tape.
ESD roll flooring with fully conductive backings are then installed over the flooring with Ultra Circuit adhesive. 8″ wide tape is frequently used to electrically bridge loose lay matting head to head or side to side.
Request Detailed Installation Instructions and conduct tests before installation.