UltraDuty II ESD Rubber Flooring

Starting at: $7.35 Square Feet

UltraDuty II Rubber ESD Flooring made from recycled tires

Environmentally Sustainable Static Dissipative Flooring

UltraDuty II ESD Rubber Flooring combines the highest quality recycled SBR tire rubber and colorful reprocessed EPDM fleck to give the flooring a “blacklight” or glowing effect. These colors give off a radioactive look that burns all the old rules of flooring.

Environmentally friendly and easy to install

  • Single-ply, non-laminated
  • Low VOC emissions
  • Compiles with ASTM Sustainability Assessment
  • Indoor and outdoor
  • Outstanding slip-resistance

Static Dissipative protection & safety

  • Meets F150/ESD S7.1 standards
  • Cushioned resilience
  • Stain resistance

Style for indoor and outdoor environments

  • Unbelievable durability
  • Logo/graphic Inlays
  • Available in rolls or tiles
  • Consistent color (no wear layer)

Or call us to speak to our ESD Flooring Experts at xxx-xxx-xxxxx

Clear

Overview

UltraDuty II ESD Rubber Flooring combines the highest quality recycled SBR tire rubber and colorful reprocessed EPDM fleck to give the flooring a “blacklight” or glowing effect. These colors give off a radioactive look that burns all the old rules of flooring.

Not only dazzling, UltraDuty II has electrostatic dissipative properties that protect computers and electronic equipment from discharges that instantly corrupt valuable data and damages your hardware.

UltraDuty II ESD Rubber Flooring is the ultimate of high-tech flooring – with durability, comfort, and slip-resistance that’ll protect your valuable hardware and equipment.

Specifications

Dimensions:

ROLLS: 50' x 4' x 3.2mm
 50' x 4' x 1/4" (6mm special - Min. 1600 sq. ft. increments
ONLY)
 25' x 4' x 8mm
TILE:36" x 36"
 18" x 18"
 Available in 3mm standard
6mm special - Min. 1600 sq. ft. increments ONLY

Specifications:

Test
ASTM
SBR Rubber
Tensile Strength
D412
200 lb/in2
Flexibility
F137
Pass 1/4 inch mandrel
Static Dissipation
F150/ESD S7.1
106 to 109 Ohms
Coefficient of Friction
D2047
>0.9
McBurney Indentation
F142, 1 min
0.1120 inches
Thermal Conductivity
C518
0.406 BTU-in/hr-ft2-° F
Static Load Limit
F970, 400 lbs
<0.005 in
Electrostatic Propensity
AATCC Test Method 134
-0.8 kv
Static Decay
FTM 4046 of FS 101B
0.01 seconds
Chemical Resistance
F925
no change
Impact Insulation Class
E492
49
Sound Transmission Coefficient
E413
51
Noise Reduction Coefficient
C423
0.10 sabine/ft2
Sustainability
E2129-01
data collected
VOC Washington State IAQ Test
n/a

24 hr. = 0.39
1 wk = 0.056

Construction

Stylish and Environmentally Friendly ESD Flooring Made from Recycled Tires

Using advanced technology, UltraDuty II ESD rubber flooring is manufactured from recycled tire rubber. The “green,” environmentally sound process uses ambient grinding to turn used tires into clean, 100% post-consumer rubber granules – which are triple distilled to eliminate all metal, dirt, and fibers.
Next, colorful, UV-resistant EPDM flecks, made from 30% post-industrial material are added. Combine both types of granules with a polyurethane, water-based polymer in huge cylinders, and you get “polymerically bound” rubber of a uniform quality and density, neither too soft nor too brittle. Once peeled, it’s ready to roll out. And any scraps go right back into the process – not to a landfill.

But the story isn’t just where UltraDuty II rubber flooring doesn’t go, it’s where it does – in places where you might not have thought: digital recording studios, TV stations, high-tech offices, computer rooms, and product display rooms.

Colors

Technical Documents